Gas work we do
- Gas hob and cooktop installs and swaps
- Freestanding gas cookers and wall ovens
- Califonts and continuous-flow gas hot water
- Gas fires, including replacing older fires
- Gas central heating boilers: servicing, repairs and replacements
- Servicing gas fires, heaters, boilers and califonts
- New gas lines and moving existing ones during renovations
- Outdoor gas points for BBQs and patio heaters
- LPG bottle setups and regulators
- Gas leak checks and repairs
We work with natural gas and LPG.
Gas servicing
Gas appliances last longer and run safer when they're serviced. We service gas fires, heaters, central heating boilers, califonts and continuous-flow hot water units. A service covers:
- Cleaning the burner and checking the flame
- Checking the flue is clear and drawing properly
- Testing gas pressure and the safety cut-offs
- Checking for leaks at the appliance and its connections
Most appliances should be serviced every year. A fire that's slow to light, a califont that cuts out, or soot marks around an opening mean it's overdue. For landlords and property managers, a yearly service on every gas appliance in a rental is cheap insurance against a breakdown mid-tenancy.
Gas central heating
A gas boiler running radiators or underfloor heating is common in bigger villas and newer homes in the hills. We service and repair gas boilers, check the flue and safety controls, and replace boilers that are past it. A boiler that's slow to heat the house, short-cycling or showing a fault code is worth a look before winter.
Gas in older villas
Thorndon, Mt Victoria, Aro Valley and Newtown have a lot of gas that's been in the wall for decades. Old pipe, fittings that have been added to over the years, and fires using flues nobody has checked in a long time.
When we work on a gas appliance in an older home, we check the supply line, flues and ventilation, not just the appliance we're working on. To do that, we need access to the other gas appliances in the house as well. If the pipework is past its best or the flue isn't drawing properly, we tell you before we connect anything new to it.
Many villas still have an old gas fire in the lounge. If yours is noisy, slow to light or leaving black marks around the opening, get it serviced. If it's beyond servicing, we can replace or remove it.
Gas in apartments
Gas hobs are common in inner-city apartments, especially in converted buildings around Te Aro and Courtenay Place. Most apartment buildings have a separate gas meter for each unit at the bottom of the building, with the lines running up a shared riser. Each unit is isolated on its own, so working on your gas doesn't mean shutting off the building. The building manager still needs to know when your unit's gas is off, and ventilation rules matter more in a small kitchen.
We sort access with the building manager and keep your gas off for as short a time as possible. See our apartments and body corporates page for how we work in shared buildings.
Gas hot water
A continuous-flow gas unit gives you endless hot water and frees up a cupboard. It suits villas and townhouses already on natural gas. If you're weighing gas against an electric cylinder or heat pump hot water, our hot water cylinders page lays out the options.
Choosing a new gas appliance
A few things are worth checking before you buy a new hob, oven, fire or califont:
- Gas type. Natural gas and LPG appliances aren't the same. Check you're buying the right version for your supply.
- Size and cut-out. A new hob has to fit the existing benchtop cut-out, or the bench needs recutting.
- Gas supply. A bigger appliance needs more gas. The pipe feeding an old two-burner hob may not keep up with a five-burner hob. A califont heats water as you use it, so it needs a much bigger gas supply than a gas hot water cylinder. We check the pipe size before connecting.
- Flue and clearances. Califonts and gas fires need a flue or an outside wall in the right spot, with set clearances from windows and doors.
- Ventilation. Every gas appliance needs enough airflow to burn properly, especially in small rooms and apartment kitchens.
Send us the model before you buy and we'll tell you if it'll work in your place.
Gas certificates
Gasfitting in New Zealand has to be done by a licensed gasfitter and certified. When we finish a job, you get the certificate for the work.
Landlords, property managers and anyone selling a home often need proof that gas work was done properly. Keep your certificates with your house records. If you can't find the paperwork for an old install, we can inspect it and tell you where it stands.
If you smell gas
- Turn off the gas at the meter or bottle if it's safe to do so.
- Don't switch lights or appliances on or off, and don't light anything.
- Open doors and windows and get everyone outside.
- From outside, call your gas retailer's emergency line. If there's any risk to life, call 111.
Once the area is safe, call us on 04 886 3354 to find and fix the leak.
Pricing
Once we've seen the appliance, the supply and the flue, we give you a price, or our rates upfront if a fixed price isn't possible.
Where we work
We do gasfitting across the CBD, Te Aro, Thorndon, Pipitea, Wadestown, Mt Victoria, Kelburn, Oriental Bay, Aro Valley, Newtown, Karori and Hataitai, and for homeowners across the wider Wellington region, from Porirua to the Hutt Valley and Kāpiti. Planning a kitchen or bathroom? See renovations.
Call 04 886 3354 or use the quote form below.